Roland AT90S - Manual (Page 175)

173
Chapter 9 Various Other Settings
■ Setting the PC Number
You can specify the Program Change number that will be
transmitted from MIDI Out when a Registration is selected.
1. Touch on the Main screen.
The System screen appears.
2. Touch either , , or Number> setting.
3. Touch < >< > to change the setting.
4. Touch .
■ MIDI IN Mode
This instrument contains two sound generators: one for SMF
data playback and one for keyboard performance.
Normally, data received at the MIDI In connector will control
only the sound generator for SMF data playback. However
by changing the MIDI IN Mode setting, you can also control
the keyboard sound generator from MIDI In.
1. Touch on the Main screen.
The System screen appears.
2. Touch < >< > to display the MIDI IN Mode.
3. Touch the MIDI IN Mode setting to switch
between “MODE 1” and “MODE 2.”
Menu Setting
Bank MSB 0-127
Bank LSB 0-127
PC Number 1-128
MODE 1
Control the instrument as a GS sound gener-
ator
MODE 2
Channels 1-8 and channel 10 will be sent to
the GS sound generator, and channel 9 and
channels 11-16 will be sent to the keyboard
sound generator.
Min
Max
Min
Max
Min
Max
Min
Max
Harmony Intelligence