Roland AT90S - Manual (Page 132)

130
Chapter 7 Recording/Playing Back What You Play
■ Displaying the Track Buttons
The track buttons will be displayed in the screen when you
record or play back a performance.
1. Touch on the Main screen.
fig.07-03_50
The Rec/Play screen appears.
fig.07-04_50
In this screen you can record and play back your
performance.
The following buttons are referred to as the track
buttons.
fig.07-04_50
Playing Back Performance
Songs Stored on Floppy Disk
In addition to playing back the music you recorded on the
instrument and saved to a floppy disk, AT-90S/80S/60S also
lets you enjoy a wide variety of commercially available song
files, such as defined below.
Playing back all performance data
1. Hold the floppy disk with the label facing
upwards, and push it into the disk drive until it
clicks into place.
The disk drive is on the right side of the unit, above the
keyboard.
fig.02-18_50
NOTE
Never eject a disk while reading or writing is in progress,
since that can damage the magnetic surface of the disk,
rendering it unusable. (The disk drive’s indicator will light
up at full brightness when the drive is busy reading or
writing data. Ordinarily, the indicator will be less brightly lit,
or be extinguished.)
SMF Music Files
The Standard MIDI File (SMF) format was designed to
provide a means for exchanging performance data
among a wide variety of devices. In addition to the song
files described earlier, the AT-90S/80S/60S is also
capable of playing back any Standard MIDI File
compatible with the General MIDI 2 or GS formats.
Eject button Indicator
Floppy Disk
Min
Max
Min
Max
Min
Max
Min
Max
Harmony Intelligence