Ricoh Aficio 340 - Manual (Page 452)

FACSIMILE USER TOOLS
196
7
number keys and press the
{{{{
#
}}}}
(Enter) key within 3 seconds.
Note
❒ If “Key Op. Settings” is not
shown, press [
↑↑↑↑
Prev.] or [
↓↓↓↓
Next] .
E
Enter the function number for
“Economy TX” using the number
keys.
F
Enter an economy transmission
time using the number keys and
press
[OK] . To change AM/PM,
press the [AM
↔ ↔ ↔ ↔
PM] key (North
America only)
Note
❒ If you press [Cancel] , the entered
time is canceled and the display
shown in 5 appears again.
G
Press [PrevMenu] .
H
Press the
{{{{
User Tools/Counter
}}}} key.
ID Code
Use this procedure to register the fol-
lowing kinds of ID codes.
❖ ❖ ❖ ❖ Confidential ID
This ID is usually required for
printing a message received in the
Confidential Reception.
⇒
P.112
“PRINTING A CONFIDENTIAL
MESSAGE”
❖ ❖ ❖ ❖ Polling ID
This ID is required for using Trans-
fer Request
⇒
P.96 “TRANSFER
REQUEST” , Transfer Station
⇒
P.60 “Transfer Station”, Default ID
Polling Transmission
⇒
P.90 “Free
Polling Transmission” , Default ID
Polling Reception
⇒
P.94 “Default
ID Polling Reception (Free Polling
Reception)”
, ID Transmission
⇒
P.52 “ID Transmission”, ID Recep-
tion
⇒
P.61 “ID Reception”func-
tion.
❖ ❖ ❖ ❖ Memory Lock ID
This ID is required for printing a
message received using Memory
Lock.
⇒
P.114 “PRINTING A FILE
RECEIVED WITH MEMORY
LOCK”
Limitation
❒ A Polling ID can be any combina-
tion of digits (0 - 9) and letters (A -
F) except for 0000 and FFFF. When
you use Transfer Request, Transfer
Station, or ID Transmission, regis-
ter the same ID code as that regis-
tered on the sender's machine.
❒ A Confidential ID and Memory
Lock ID can be any a four digit nu-
meric code except for 0000.
❒ For Confidential ID and Memory
Lock ID, the optional Fax Feature
Expander is required.
A
Make sure that the machine is in
Facsimile mode and the standby
display is shown.