Ricoh Aficio 340 - Manual (Page 448)

FACSIMILE USER TOOLS
192
7
C
Enter the number of the “Fax”.
The Facsimile User Tool main
menu appears.
Reference
For how to use the System User
Tools, refer to the System Set-
tings manual.
D
Enter the function number for
“Key Op. Settings” using the
number keys and press the
{{{{
#
}}}}
(Enter) key within 3 seconds.
Note
❒ If “Key Op. Settings” is not
shown, press [
↑↑↑↑
Prev.] or [
↓↓↓↓
Next] .
E
Enter the function number for
“Authorized RX” using the num-
ber keys.
F
Enter the function number for
“Print Sender List” using the
number keys.
G
Press the
{{{{
Start
}}}} key.
Note
❒ When you press [Cancel] , the
printing stops and the display
shown in 4 appears again.
H
Press [PrevMenu] twice.
I
Press the
{{{{
User Tools/Counter
}}}} key.
Monitor Volume
You can change the volume of the fol-
lowing sounds the machine makes.
❖ ❖ ❖ ❖ On Hook
When you press the {{{{
On Hook Dial
}}}}
key.
❖ ❖ ❖ ❖ Transmission
When the machine send a mes-
sage.
❖ ❖ ❖ ❖ Reception
When the machine receive a mes-
sage.
❖ ❖ ❖ ❖ DiallingDialing
After pressing the
{{{{
Start
}}}} key, this
sound is output until the line con-
nects to the destination.
❖ ❖ ❖ ❖ Printing
Sounds when a received message
has been printed. See P.64 “Print
Completion Beep”
.
A
Make sure that the machine is in
Facsimile mode and the standby
display is shown.
Note
❒ If the standby display is not
shown, press the
{{{{
Fax
}}}} key.
B
Press the
{{{{
User Tools/Counter
}}}} key.
2
2
2
2
1 1
Sort
Staple
Stack
1-Sided 2-Sided
2-Sided 2-Sided
User Tools / Counter
Enhanced Aut o Reduce/
Book 2-Sided
ND2L01E0