Ricoh Aficio 340 User Manual
Page 281
MEMORY TRANSMISSION
25
2
the remaining pages from the
Document Feeder (ADF). After
you place the last page on the
exposure glass, you have 60 sec-
onds to insert the remaining
pages in the Document Feeder
(ADF).
❒ Note that you cannot set pages
on the exposure glass after you
have started using the Docu-
ment Feeder (ADF).
❒ Do not open the Document
Feeder (ADF) while it is scan-
ning in originals.
Note
❒ Place the original you want to
store in memory on the expo-
sure glass or the Document
Feeder (ADF). To store multiple
page originals from the expo-
sure glass, set them page by
page.
❒ You can scan half the pages of
your original from the exposure
glass and the remainder from
the Document Feeder (ADF).
When you have finished scan-
ning from the exposure glass,
place the rest of the pages in the
Document Feeder (ADF) and
press
{{{{
Start
}}}} .
❒ The original can be placed at
any time up until you press the
{{{{
Start
}}}} key.
Reference
P.18 “HOW TO SET AN ORIGI-
NAL”
C
Select any scan settings you re-
quire.
D
Dial. If you wish to send the same
message to more than one desti-
nation, press
[Add]
and dial anoth-
er destination. Repeat this step
for all destinations.
If you make a mistake, press the
{{{{
Clear/Stop
}}}} key and enter the cor-
rect number again.
Note
❒ When dialing with the number
keys or using Chain Dial (P.46
“Chain Dial”
), you can select the
line type (G3 or G4) before
pressing
[Add]
in step 4.
❒ If you do not set an original
within 30 seconds of entering a
destination fax number, the
transmission is cancelled.
Reference
E
Press the
{{{{
Start
}}}} key.
The machine starts scanning the
original.
The machine calls the destination.
The name or fax number which is
programmed as the RTI or CSI in
C
d Dial
ook Dial
e /
al
Clear / Stop
Start
Enter
ND2R02E1
2
3
4
5
6
7
8
0
9
1
ABC
DEF
JKL
MNO
GHI
WXY
TUV
OPER
PRS