Ricoh 70E - Manual (Page 16)

Unpacking 2-3
II L 00
5) Jack up the Engine by rotating the leveling bolts.
Put the wood spacer (It is taken out from the accessories box.) under four leveling bolts.
Jack up the Engine by rotating the leveling bolts.
6) Remove the Base Packing.
7) Place all Casters in the same direction.
8) Lower the Engine on the Under Tray and screw the leveling bolts in all the way.
9) Attach the four Ramps under the Platform.
10) Carefully roll the Engine off the Tray.
Ramp
Platform
Caster
Down
Up
Leveling Bolt
II L 01