Nortel Networks M3310 - Manual (Page 94)

94 Digital Telephone IP Adapter Installation and Administration Guide
Configuring the IP Adapter unit using the telephone menu Standard 2.1
9 The telephone display asks if you want to modify the SPRE code that you
must dial to go offline manually, similar to the following:
Modify Offline SPRE?
[1-Yes 2-No]
IF you want to THEN do the following:
modify the
number that you
must dial to go
offline with the
Digital Telephone
IP Adapter
unit in
the absence of an
offline command
in the Online/
Offline Table,
1 Press 1.
2 Press the Hold key.
Result: The telephone display prompts you for a
new offline SPRE code. The telephone display also
shows the current offline SPRE code, similar to the
following:
Enter Offline SPRE
#98
3 Press the digits of the new offline SPRE code.
Note: Refer to the Note on page 93 for information
on pound signs (#) in SPRE codes.
4 Press the Hold key.
5 Proceed to step 10 on page 95.
retain the current
offline SPRE
code, 1 Press 2.
2 Press the Hold key.