Nortel Networks M3310 - Manual (Page 106)

106 Digital Telephone IP Adapter Installation and Administration Guide
Configuring the IP Adapter unit using the telephone menu Standard 2.1
17 The telephone display asks if you want to configure the type of telephone
set attached to this Digital Telephone IP Adapter unit, similar to the
following:
Configure Set Type?
[1-Yes 2-No]
IF you want to THEN do the following:
modify the
current telephone
set type
configuration for
this Digital
Telephone IP
Adapter unit, 1 Press 1.
2 Press the Hold key.
Result: The telephone display asks what type of
telephone set is connected to the Digital Telephone
IP Adapter unit, similar to the following:
Is this a M2006?
[1-Yes 2-No]
3 If the telephone display does not show the model of
your telephone set, press 2.
4 Press the Hold key.
Note: The telephone display repeats this question
until it receives an affirmative answer with the
following set types: M2008, M2216, M2616,
M2616CT, M3310, M3820, M3902, M3903,
M3904, M3905, or OTHER. Choose OTHER if you
are using a Nortel digital telephone set with a
display that is not included in the preceding list.
5 When the telephone display shows the model of
your telephone set, press 1 and the Hold key.
Result: The telephone display asks you to confirm
your identification of your telephone set type, similar
to the following:
Are you sure?
M2616?-[1-Yes 2-No]