Nortel Networks M3310 User Manual
Page 79
Digital Telephone IP Adapter Installation and Administration Guide
79
January 2005
Installing the Digital Telephone IP Adapter unit
Connecting the Digital Telephone External IP Adapter unit
Obtain the following cables for your network. These cables are not supplied.
!
Ethernet cable
If you are connecting the Digital Telephone External IP Adapter unit to a
hub, you need a standard CAT5 unshielded twisted-pair (UTP), straight-
through Ethernet cable. Ensure that this cable is no longer than 100 meters
(325 feet) in length.
Note: Place digital telephones no farther than 1230.7 meters (4000 feet) from
the Digital Telephone External IP Adapter unit.
The following diagram shows the connections on the back panel of the Digital
Telephone External IP Adapter unit.
G101490IP
Digital Telephone External IP Adapter unit
Rear view
connectors
Power Analog
line
Ethernet ADMIN Digital
phone