Nortel Networks M3310 - Manual (Page 104)

104 Digital Telephone IP Adapter Installation and Administration Guide
Configuring the IP Adapter unit using the telephone menu Standard 2.1
14 The telephone display asks if you want to modify the local calling settings
on this Digital Telephone IP Adapter unit, similar to the following:
Modify Local Calling?
[1-Yes 2-No]
This step does not apply to Digital Telephone IP Adapter units. Press 2 and
continue to step 15 on page 105.
enable IP
connection to the
RLC from this
Digital Telephone
IP Adapter
unit,
1 Press 1.
2 Press the Hold key.
Result: The telephone display prompts you to enter
an IP address for the RLC and shows the current
value it has for this address, similar to the following:
Enter RLC IP Address
192.68.243.254
3 Press the digits of the new RLC IP address.
4 Press the Hold key.
Result: The telephone display prompts you for the
IP Signaling setting for this Digital Telephone IP
Adapter unit and displays the current setting, similar
to the following:
IP Signaling
1-Permanent 2-OnDemand:2
5 Choose from the options presented.
6 Press the Hold key.
7 Proceed to step 14, below.
disable IP
connection to the
RLC from this
Digital Telephone
IP Adapter
unit,
1 Press 2.
2 Press the Hold key.
Result: Proceed to step 19 on page 108.
IF you want to THEN do the following: