Connecting the digital telephone internal ip, Adapter circuit card – Nortel Networks M3310 User Manual
Page 74
74
Digital Telephone IP Adapter Installation and Administration Guide
Installing the Digital Telephone IP Adapter unit
Standard 2.1
Connecting the Digital Telephone Internal IP Adapter circuit card
Ensure that you have obtained the following telephone and Ethernet cables for
your network:
!
Ethernet cable
If you are connecting the Digital Telephone Internal IP Adapter circuit card
to a hub, you need a standard CAT5 unshielded twisted-pair (UTP) straight-
through Ethernet cable. The cable must be no longer than 100 meters (325
feet).
Note: These cables are not supplied in the Digital Telephone Internal IP Adapter
package.
G101482IP
Digital Telephone IP Adapter
circuit card
This manual is related to the following products: