Nortel Networks M3310 User Manual
Page 107
Digital Telephone IP Adapter Installation and Administration Guide
107
January 2005
Configuring the IP Adapter unit using the telephone menu
18 The telephone display asks if you want to save the configuration you have
just entered, similar to the following:
Save Configuration?
[1-Yes 2-No]
modify the
current telephone
set type
configuration for
this Digital
Telephone IP
Adapter unit,
(continued)
6 If this is not the correct model number of your
telephone set, press 2 and return to step 5, above.
7 If this is the correct model number of your telephone
set, press 1.
8 Press the Hold key.
9 Proceed to step 18, below.
not modify the
current telephone
set type
configuration for
this Digital
Telephone IP
Adapter unit,
1 Press 1.
2 Press the Hold key.
IF you want to
THEN do the following:
discard your most
recent
configuration
changes,
1 Press 2.
2 Press the Hold key.
Result: The telephone display asks if you want to
reboot the Digital Telephone IP Adapter unit, similar
to the following:
Reboot Unit?
[1-Yes 2-No]
3 Proceed to step 19 on page 108.
IF you want to
THEN do the following: