Nortel Networks M3310 - Manual (Page 120)

120 Digital Telephone IP Adapter Installation and Administration Guide
Changing configuration settings using Configuration Manager Standard 2.1
SPRE Codes: DeRegistration Enter the SPRE code (maximum seven digits) that
disengages the user from a multi-user or dynamic port,
or accept the default code. The default is #96.
Note: The SPRE code is automatically prefixed with a
pound sign (#). This means users must dial # before the
SPRE code when disengaging from a port.
Local Call: Status This setting does not apply to Digital Telephone IP
Adapters.
Local Call: Local Calling Key
Position This setting does not apply to Digital Telephone IP
Adapters.
Local DN This setting does not apply to Digital Telephone IP
Adapters.
Local Call: Autohold This setting does not apply to Digital Telephone IP
Adapters.
Phone Type Select the type of digital telephone that the Digital
Telephone IP Adapter unit attaches to, using the drop
down list box.
Valid options are M2008, M2216, M2616, M2616CT,
M3310, M3820, M3902, M3903, M3904, M3905, and
OTHER.
The default is M2616.
Modem Tones This setting does not apply to Digital Telephone IP
Adapters.
Analog Localization This setting does not apply to Digital Telephone IP
Adapters.
Field Description