Nortel Networks M3310 - Manual (Page 183)

Digital Telephone IP Adapter Installation and Administration Guide 183
January 2005 Administration
Ethernet Interface Statistics field descriptions
The following table describes the statistics on the Ethernet Interface Statistics
screen:
Statistic Description
Channel Identifies the Ethernet device that the statistics on that
line apply to.
Valid value is 1.
LAN Drv Identifies the LAN driver used by the call.
Admin Identifies the administrative state of the port.
Valid values are 1 (Enabled) and 0 (Disabled).
Oper Identifies the operational state of the port.
Valid values are 1 (Up) and 0 (Down).
IfcType Identifies the interface type used by the call.
IfcNo Identifies the Ethernet interface used by the call.
Valid values are 0 (ELAN) and 1 (CLAN).
MTUlen Identifies the Maximum Transmission Unit for this
interface in bytes.
Speed Identifies the data rate of this interface in Mbps.
Rx - Octet Identifies the number of bytes received on the given
channel since the statistics were last reset.
UPkts Identifies the number of packets with a unicast
Ethernet address that directly matches the Ethernet
address of the identified unit. This statistic describes
the period of time since the statistics were last reset.