beautypg.com

Nortel Networks M3310 User Manual

Page 102

background image

102

Digital Telephone IP Adapter Installation and Administration Guide

Configuring the IP Adapter unit using the telephone menu

Standard 2.1

modify the current

RLC settings,

1 Press 1.
2 Press the Hold key.

Result: The telephone display prompts you to enter
the RLC port number that you want to process this
Digital Telephone IP Adapter unit’s traffic. The
telephone display also shows the RLC port number
currently configured to handle this traffic, similar to
the following:

Enter Port # of RLC

7

3 Press the digit(s) of the new port number.
4 Press the Hold key.

Result: The telephone display prompts you to enter
the security level that you want to assign to this
Digital Telephone IP Adapter unit. The telephone
display also shows the current security level, similar
to the following:

Enter Security Level

1

allow unrestricted

access to the
Digital Telephone
IP Adapter

unit

and the RLC,

1 Press 1 to select No security.
2 Press the Hold key.
3 Proceed to “Enable IP? [1-Yes 2-No]” on page 103.

IF you want to

THEN do the following:

This manual is related to the following products: