Testing the network connection – Nortel Networks M3310 User Manual
Page 82
82
Digital Telephone IP Adapter Installation and Administration Guide
Installing the Digital Telephone IP Adapter unit
Standard 2.1
Testing the network connection
After you have installed the hardware and performed initial configuration, use
the following methods to test the network connectivity:
!
Perform a PING test.To perform this test, the following must be true:
— You must be physically connected to the network.
— You must be logged on to Configuration Manager.
Refer to “Using Configuration Manager’s PING” on page 221 for com-
plete details on performing a Configuration Manager PING.
!
Perform a syslog test.
Refer to “Syslog testing” on page 224 for complete details on performing a
syslog test.
This manual is related to the following products: