Nortel Networks 380-24F - Manual (Page 67)

Chapter 4 Configuring the switch 67
Using Web-based Management for the BayStack 380-24F Gigabit Switch
Deleting an SNMPv3 target address configuration
To delete an SNMPv3 target address configuration:
1 From the main menu, choose Configuration > SNMPv3 > Target Address.
The Target Address page opens ( Figure 21 on page 65 ).
2 In the Target Address Table, click the Delete icon for the entry you want to
delete.
A message opens prompting you to confirm your request.
3 Do one of the following:
• Click Yes to delete the target address configuration.
• Click Cancel to return to the table without making changes.
Configuring an SNMPv3 management target parameter
SNMPv3 management target parameters are used during notification
generation to specify the communication parameters used for exchanges
with notification recipients.
You can view a table of existing SNMPv3 target parameter configurations, create
SNMPv3 target parameters that associate notifications with particular recipients,
and delete existing SNMPv3 target parameter configurations.
Creating an SNMPv3 target parameter configuration
To create an SNMPv3 target parameter configuration:
1 From the main menu, choose Configuration > SNMPv3 > Target Parameter.
The Target Parameter page opens (Figure 22) .