Nortel Networks 380-24F - Manual (Page 30)

30 Chapter 2 Administering the switch
214394-A
Table 5 describes the items on the Console page.
2 Type the information, or make a selection from the list.
3 Click Submit.
Configuring remote dial-in access security
To configure remote dial-in access security parameters:
1 From the main menu, choose Administration > Security > RADIUS.
The RADIUS page opens ( Figure 6 ).
Table 5 Console page fields
Section Fields Setting Description
Note: Console, Telnet, and Web settings share the same switch password type and password.
Console Switch
Password Setting Console Switch Password
Setting Type (1) None
(2) Local Password
(3) RADIUS Authentication Displays the switch password types.
Note: The default is None.
Read-Only Switch
Password 1..15 Type the read-only password setting for
the read-only access user.
Read-Write Switch
Password 1..15 Type the read-write password setting for
the read-write access user.
Console Password
Setting Console Password
Setting Type (1) None
(2) Local Password
(3) RADIUS Authentication Displays the switch password types.
Note: The default is None.
Read-Only Password 1..15 Type the read-only password setting for
the read-only access user.
Read-Write Password 1..15 Type the read-write password setting for
the read-write access user.