Nortel Networks 380-24F - Manual (Page 57)

Chapter 4 Configuring the switch 57
Using Web-based Management for the BayStack 380-24F Gigabit Switch
2 In the Group Membership Creation section, type information in the text
boxes, or select from a list.
3 Click Submit.
The new entry is displayed in the Group Membership Table ( Figure 17 on
page 56 ).
Deleting an SNMPv3 group membership configuration
To delete an SNMPv3 group membership configuration:
1 From the main menu, choose Configuration > SNMPv3 > Group
Membership.
The Group Membership page opens ( Figure 17 on page 56 ).
2 In the Group Membership Table, click the Delete icon for the entry you want
to delete.
A message opens prompting you to confirm your request.
Table 18 Group Membership page items
Item and MIB association Range Description
Deletes the row.
Security Name
(vacmSecurityToGroupStatus) 1..32 Type a string of character to create a security name for the
principal which is mapped by this entry to a group name.
Security Model
(vacmSecurityToGroupStatus) (1) SNMPv1
(2) SNMPv2c
(3) USM Choose the security model within which the security name to
group name mapping is valid.
Group Name
(vacmGroupName) 1..32 Type a string of character to specify the group name.
Entry Storage
(vacmSecurityToGroupStorageType) (1) Volatile
(2) Non-Volatile Choose your storage preference. Selecting Volatile requests
information to be dropped (lost) when you turn the power off.
Selecting Non-Volatile requests information to be saved in
NVRAM when you turn the power off.