Nortel Networks 380-24F - Manual (Page 41)

41
Using Web-based Management for the BayStack 380-24F Gigabit Switch
Chapter 4
Configuring the switch
The switch configuration options available to you are:
• “Configuring BootP, IP, and gateway settings”, (next)
• “Modifying system settings” on page 44
• “About SNMP” on page 49
• “Configuring SNMPv1” on page 49
• “Configuring SNMPv3” on page 51
• “Viewing learned MAC addresses by VLAN” on page 71
• “Viewing learned MAC addresses by VLAN” on page 71
• “Configuring switch port autonegotiation speed” on page 74
• “Configuring flow control” on page 75
• “Downloading switch images” on page 77
• “Storing or retrieving a configuration file from a TFTP server” on page 80
• “Configuring port communication speed” on page 83
Note: In order to use all the BayStack 380-24F Gigabit Switch
management features, you must connect your management station into a
BayStack 380-24F Gigabit Switch port.