Pitney Bowes ADDRESSRIGHT DA400 - Manual (Page 98)

B-5
Specifi cations
Material Notes
Envelopes have a flap along the long edge and are pro-
cessed by the printer non-flap edge first. Envelopes may
have either a diagonal or straight edge along the enve-
lope flap. Stuffing materials must be machine folded or
cut sheets.
Booklets are defined as media having physical dimen-
sions 6" (152mm) x 9" (229mm) or larger. Booklets have
an opening along their long edge which is covered by a
flap with an adhesive seal.
Catalogue envelopes have an opening along their short
edge which is closed by a flap with an adhesive seal.
Postcards have no folds or bends. The printable side
may have a higher surface roughness than the non-
printable side.
Self-mailers may be of "C," "Z," or 1/2-folded construc-
tion. They may not exceed the maximum allowable
thickness as specified on the previous page and must
Material
Specifications Approved Media
The paper types listed below are approved for use with
the DA400 Printer. Please note that the di men sion al
limits above apply in all cases, and that all media (flats,
envelopes, postcards, catalogue envelopes, etc.) must
be without windows, unstuffed and unsealed.
• White Wove
• Bond paper
• Recycled paper
• Coated paper
Media Sizes
Minimum: 3" (76mm) x 5" (127) mm; Maximum: 13"
(330mm) x 15" (390mm). Thickness: 0.003" (0.076mm)
to 0.125" (3.175mm). Also see the table on the next
page.
• Card stock
• Brown kraft
• Manila
SV61186ABook.indb B-5 3/29/2004, 1:45:21 PM