Pitney Bowes ADDRESSRIGHT DA400 - Manual (Page 20)

2-3
Setup
Once you've placed the printer in a suitable location, as-
semble the printer components in the following order:
NOTE: Do not plug the printer into the power source until
you've completed steps 1-4.
1. Install the bin extension
2. Install the wire frame assembly.
3. Install the sliding fence.
4. Connect the parallel or USB cable.
5. Attach the power cord and turn the printer ON.
6. Install the print cartridges.
Assembling
the Printer
1. Installing the Bin Extension
Seat the Bin Extension on
the upper floor as shown at
right. Use the screws provid-
ed to secure the Bin Exten-
sion.
SV61186ABook.indb 2-3 3/29/2004, 1:44:46 PM