Pitney Bowes ADDRESSRIGHT DA400 - Manual (Page 69)

A-8
Printer Menus
1. Address Layout (continued)
B. Dis tance from Top
This menu item allows you to change the position of the
record without moving the bank of print cartridges. The
printer achieves this by reducing the available area used
for printing. Therefore, increasing the setting decreases
the print area. The recommended setting for Distance
From Top is 0.00.
Press the + or – buttons to increase or decrease the
Distance from Top from 0 to 1.5" (38mm). Press the Enter
button to enable the desired measurement.
C. Line Spacing
Press the + or – buttons to increase or decrease the Line
Spacing (i.e., 3, 4, 6, 8 lines/inch or Automatic), defined
in lines per inch. Automatic line pitch selection is based
on industry-standard definitions for line spacing for each
print pitch and style selected. The printer will automati-
cally select the correct setting for the font and size of the
characters being printed.
D. Ori en ta tion
The choices are Normal and Inverted.
Select Normal for most applications. This tells the printer
that the bottom edge of the ma te ri al is against the Rear
Chassis Assembly. The print will appear upside down
when viewed from the front of the printer.
The Inverted option tells the printer that the top edge of
the material is against the Rear Chassis Assembly. The
print will appear right side up when viewed from the front
of the printer.
For instructions how to use the menus and select an op-
tion, refer to page A-4.
Using the
Main Menu
(continued)
SV61186ABook.indb A-8 3/29/2004, 1:45:12 PM