Pitney Bowes ADDRESSRIGHT DA400 - Manual (Page 53)

5-8
Printer Maintenance
Cleaning the
Wipers The Wipers beneath the bank of Print Cartridges will, over
time, pick up ink, wax, clay and other material from the me-
dia it touches. Once enough of this material accumulates
on the wipers, it will leave marks or smears on the media.
1. Loosen the Print
Cartridges assembly
locating screw.
2. Swivel the Print Cartridges
assembly up and back to
expose the wipers. (You
may need to move the
Print Cartridges assembly
to the front or rear to gain
clearance to swivel the
assembly fully back).
3. Use water to dampen a
soft cloth to remove any
ink, wax, clay, etc. and
keep the wipers clean.
Wipers
Cleaning the
Printer Floor
Ink will get sprayed on the printer floor from all the purg-
ing, setting up and printing records, etc. Eventually enough
ink will accumulate on the floor that it will transfer onto the
back of any media that comes in contact with the ink. The
ink will also move to other printer components that have
come in contact with the ink on the media.
1. Swivel the Print Cartridges
assembly out of the way
(see sections 1 and 2 of
"Cleaning the Wipers"
above).
2. Use water to dampen
a soft cotton cloth and
remove the ink from the
printer Floor.
SV61186ABook.indb 5-8 3/29/2004, 1:45:06 PM