Pitney Bowes ADDRESSRIGHT DA400 - Manual (Page 19)

2-2
Setup
The following environmental considerations must be kept
in mind when selecting a location for the Address Printer.
Doing otherwise may affect the operation and performance
of the Address Printer.
1. Place the printer close enough to the computer for the
parallel or USB cable to reach.
NOTE: A/B Parallel switches are not recommended
for operation with this printer.
2. Place the printer on a flat, stable surface.
3. Use a grounded, dedicated outlet for the printer only.
Do not use an adapter plug.
4. Avoid locations near direct sunlight, excessive heat,
high humidity, moisture, or dust.
5. Keep the entire system away from large motors or
other appliances that might disturb the power supply or
create potential interference.
Choosing a
Location
SV61186ABook.indb 2-2 3/29/2004, 1:44:46 PM