Polycom VSX Series - Manual (Page 38)

Administrator’s Guide for the VSX Series
2 - 16
Using a Desktop System as the Monitor for a Computer
You can use the VSX 3000 or VSX 3000A system as a high-resolution XGA
display for your computer, as shown on the system setup sheet.
To use the VSX 3000 or VSX 3000A system as the monitor for a computer:
1. Connect the VGA cable from the VGA connector on the back of the
VSX 3000 or VSX 3000A system to the VGA connector on your computer.
2. To use the system’s built-in speakers for your computer’s audio, connect
an audio cable from your computer to the audio input connector on the
left side of the VSX 3000 or VSX 3000A system.
Points to note about automatic camera tracking with the PowerCam Plus
camera:
•
Automatic camera tracking works best at distances of 15 feet (4.6 m) or less.
• Automatic camera tracking works best if you face the camera when you speak.
• Leave at least one foot (0.3 m) of space above, behind, to the right, and to the
left of the camera. Echoes from nearby surfaces interfere with tracking.
• Automatic camera tracking works best in rooms with good acoustics.
• For information about user interface settings required for automatic camera
tracking, refer to
Configuring Automatic Camera Tracking on page 4-4 .