Polycom VSX Series - Manual (Page 169)

System Usage and Statistics
6 - 5
Information in the CDR
The following table describes the data fields in the CDR.
Data Description
Row ID Each call is logged on the first available row. A call is a
connection to a single site, so there may be more than one
call in a conference.
Start Date The call start date, in the format dd-mm-yyyy.
Start Time The call start time, in the 24-hour format hh:mm:ss.
End Date The call end date.
End Time The call end time.
Call Duration The length of the call.
Account Number If Require Account Number to Dial is enabled on the
system, the value entered by the user is displayed in this
field.
Remote System
Name The far site’s system name.
Call Field Number 1 The number dialed from the first call field, not necessarily
the transport address.
For incoming calls — The caller ID information from the first
number received from a far site.
Call Field Number 2
(If applicable for
call) For outgoing calls — The number dialed from the second
call field, not necessarily the transport address.
For incoming calls — The caller ID information from the
second number received from a far site.
Transport Type The type of call — Either H.320 (ISDN) or H.323 (IP).
Call Rate The bandwidth negotiated with the far site.
System
Manufacturer The name of the system manufacturer, model, and software
version, if they can be determined.
Call Direction In — For calls received.
Out — For calls placed from the system.
Conference ID A number given to each conference. A conference can
include more than one far site, so there may be more than
one row with the same conference ID.
Call ID Identifies individual calls within the same conference.
Total H.320
Channels Used The total number of ISDN B channels used in the call. For
example, a 384K call would use six B channels.
Endpoint Alias The alias of the far site.