Promise Technology Network Device EX8654 - Manual (Page 275)

Chapter 8: Troubleshooting
261
Problems Reported in WebPAM PRO
Open WebPAM PRO
If WebPAM PRO is not running, do the following actions:
1.
Open WebPAM PRO.
See “Logging into WebPAM PRO” on page 107 for more information.
2. Click the Subsystem icon in Tree View.
3. Click the Enclosures icon and its subordinate icons.
4. Click the Disk Arrays icon and its subordinate icons.
What to Look For
When a logical drive goes critical or offline, WebPAM PRO reports the condition
in the following ways:
• Displays yellow !s red Xs in Tree View (below)
• Sends email messages, per your configuration
• Displays popup messages, per your configuration (below)