Promise Technology Network Device EX8654 - Manual (Page 212)

SuperTrak EX Series User Manual
198
mod Modifies settings. Requires the -s option.
locate Locates an enclosure by flashing its LEDs.
-e Enclosure ID. The default value is 1 if unspecified.
For list action, the default is for all enclosures if
unspecified.
-s "=" Specifies the settings to change.
tempwarning= Enclosure warning theshold temperature, in degrees
Celsius.
10..51
tempcritical= Enclosure critical theshold temperature, in degrees
Celsius.
52..61
ctrltempwarning= Controller warning theshold temperature, in degrees
Celsius.
10..61
ctrltempcritical= Controller critical threshold temperature, in degrees
Celsius.
62..71
-t Specifies which type of FRU to locate. Requires -a locate
option.
ctrl Locates the controller.
cooling Locates the cooling unit. Only works with SAS type
enclosure.
psu Locates the power supply unit. Only works with SAS type
enclosure.
-f Specifies id of FRU to locate. Requires -a locate option.
Valid values are 1 and 2.
-v Verbose mode. Requires -a list option. VPD information
is displayed.
Examples
enclosure
enclosure -v
enclosure -a mod -s "tempwarning=40,tempcritical=55"
event
Usage
event [-a ] [-l ] [-i ] [-c ] [-v]