Promise Technology Network Device EX8654 - Manual (Page 228)

SuperTrak EX Series User Manual
214
Summary
The spath command discovers and changes subsystem paths.
Options
-a Which action to perform.
list (Default) Lists the subsystem paths that have been
discovered.
discover Discovers subsystem paths.
chgpath Changes the current subsystem path to the new specified
path.
If -t -p is not specified, it will list the
current subsystem path.
-t Specifies the type of path.
hba HBA.
subsys
Subsystem.
With the -a list option, the default is both HBA and
Subsystem.
With the -a chgpath options, you must specify -t and -p to
change the path.
You cannot use the -t option with the -a discover option.
-p Specifies the path number of the HBA and subsystem.
The path number starts from 1.
-c Specifies the number of paths to be displayed.
Not currently supported.
Examples
spath
spath -a discover
spath -a chgpath -t subsys -p 1
stats
Usage
stats [-t ] [-i ] [-c ]
stats -a clear
Summary
The stats command displays statistics of subsytem, controller, enclosure,
physical drives, and logical drives; and resets the statistics count to zero.