Promise Technology Network Device EX8654 User Manual
Page 200

SuperTrak EX Series User Manual
186
deleting, locating, accepting, adding or deleting a logical
drive. Only one array may be specified.
-p
Specifies physical drives to be used in an array, with -a
add option. PD IDs are specified individually or separated
by comma. Sequential group of physical drives are
specified by placing a ~ between numbers such as 1~6.
This will include physical drives 1, 2, 3, 4, 5, and 6.
-s "
(mod) an array. Options are comma separated.
alias=
A user-specified array name. Up to 32 characters, alpha-
numeric characters, blank spaces and underscores.
Beginning and ending blank spaces are discarded.
mediapatrol=
Enables or disables Media Patrol for this array.
enable
The default is enable.
disable
pdm=
Enables or disables PDM for this array.
enable
The default is enable.
disable
-l "
drive to an existing array (addld) or during array creation
(add). Options are comma separated.
Specifies a list of Logical Drive IDs. Requires the -a delld
option.
ID=
Assigns a specific ID to an array. Overrides automatic ID
assignment. Valid values are 0-255.
Alias=
A user-specified name for the logical drive.
Raid=
Specifies logical drive RAID level.
0
Striping.
1
Mirroring on two drives.
5
Parity, requiring 3 or more drives.
10
Mirroring on even number of drives.
1e
Extended mirroring, requiring 2 or more drives.
50
Striping on multiple RAID 5, requiring 6 or more drives.
6
Allow two drive failure, requiring 4 or more drives.
60
Striping on multiple RAID 6, requiring 8 or more drives.
Capacity=
Specifies logical drive capacity. Can be specified in
megabytes (mb), gigabytes (gb) or terabytes (tb), up to 2