Chapter 8: troubleshooting, Problems reported by supertrak, Buzzer – Promise Technology Network Device EX8654 User Manual
Page 271: Leds, Buzzer leds

257
Chapter 8: Troubleshooting
•
Problem Reports from SuperTrak
•
•
•
•
Problems Reported in WebPAM PRO (page 261)
•
Critical & Offline Logical Drives (page 263)
•
Salvaging Physical Drives (page 265)
•
Rebuilding a Logical Drive (page 266)
•
Recovering from a Blank Screen (page 268)
Problems Reported by SuperTrak
The SuperTrak EX Controller provides both audible and visual indicators to alert
you to a problem.
Buzzer
The buzzer sounds to inform you that your RAID system needs attention. But the
buzzer does not specify the condition. When a continuous tone sounds, there are
multiple alarm patterns sounding at the same time.
When the buzzer sounds, take the following actions:
•
Check your disk arrays and logical drives.
•
Check the Event Log. See page 101 or page 113.
LEDs
If your system is configured with Global LEDs or Direct LEDs, they will indicate
when a problem is present. Use the SuperBuild utility or WebPAM PRO to further
diagnose and correct the problem.