Promise Technology Network Device EX8654 - Manual (Page 216)

SuperTrak EX Series User Manual
202
A quick initialization writes to the first and last few megabytes of the logical drive.
Typically, a quick initialization is completed in moments.
Options
-a Specifies the action to perform.
list Displays a list of the initializations in progress or paused
and their status. The default action.
start Start an initialization.
stop Stop an initialization.
pause Pause an initialization.
resume Resume an initialization.
-l Specifies the logical drive to be initialized.
-q Specifies the amount of data in megabytes (MB) for a
quick initialization.
1..1024
-p Specifies the pattern for a full initialization.
The pattern can range from 1 to 128 bytes (HEX string),
and is padded to even number of bytes, such as, fff
padded to 0fff.
Pattern is not supported for quick initialization.
Examples
init
init -a stop -l0
init -a start -l0 -p5a5a0101
logdrv
Usage
logdrv [-a ] [-l ] [-c ] [-v]
logdrv -a locate -l
logdrv -a mod -l -s ""
Summary
The logdrv command displays information about the logical drives and changes
logical drive settings.
To create a logical drive, see the array command on page 184.
Options
-a Specifies the action to perform.