Promise Technology Network Device EX8654 - Manual (Page 214)

SuperTrak EX Series User Manual
200
Options
-t Specifies the type of file to export.
userdb User database file. This file type is not applicable for in-
band and can only be exported to a remote host.
servicereport System service report file. This file is exported to remote
host for embedded and local host for in-band.
-f Specifies the name of the file to be exported.
-s Specifies TFTP server’s IP or host name.
Do not specify TFTP server for in-band.
-p The port number of the TFTP server. Default is 69.
Do not specify port number for in-band.
Examples
export -t userdb -s 192.168.1.1 -f userdb.bin
export -t servicereport -s 192.168.1.1 -f servicereport # for embedded
export -t servicereport -f servicereport # for in-band
factorydefaults
Usage
factorydefaults -a -t
Summary
The factorydefaults command restores factory default settings.
Options
-a Specifies the action to perform.
restore Restore the factory default settings.
-t Specifies the type of settings to restore.
all All settings.
allfw All firmware settings.
allsw Subsystems only. All software settings.
Following are individual Firmware settings:
bga Background activity settings.
ctrl Controller settings.
encl Enclosure settings, including temperature thresholds,
buzzer etc.
fc Subsystems only. FC port settings.