Paradyne 3800 - Manual (Page 78)

4. AT Command Set and S-Registers
4-43 3830-A2-GB91-20 November 1996
Table 4-3
(15 of 15)
Model 3830 S-Registers
S90

DTE Rate = VF Rate
Register forces the DTE (computer) data rate to be equal to the VF
(telephone line) data rate.
Register has the following values:
0 = Disable
1 = Enable
Factory setting is Disable.
S91

Cellular Enhancements
Register determines whether parameters are set to improve performance
over a cellular link. Should be enabled when the remote modem is using
a cellular connection.
Register has the following values:
0 = Disable
1 = Enable
Factory setting is Disable; &F5 and &F6 set S91 to Enable.
S93

RJ11 Cellular Adapt
Register controls support for an RJ11 connection, including generation of
the ETC 1.1 Calling Tone during call origination.
0 = Disable
1 = Enable
Factory setting is Disable.