Paradyne 3800 - Manual (Page 73)

COMSPHERE 3800 Series Modems – Model 3830
4-38 November 1996 3830-A2-GB91-20
Table 4-3
(10 of 15)
Model 3830 S-Registers
S65

Line Current Disconnect
Determines if the modem disconnects if an interruption in loop current
greater than 8 milliseconds or 90 milliseconds occurs.
Register has the following values:
0 = Enable (8 msec)
1 = Enable (90 msec)
2 = Disable
Factory setting is Enable (8msec).
S67

Directory Location 1 Callback
Determines if the modem uses the single number callback function.
Register has the following values:
0 = Disable
1 = Enable
Factory setting is Disable.
S69

Make Busy Via DTR
Determines if the modem goes off-hook (busy) when DTR is Off.
Register has the following values:
0 = Disable
1 = Enable
Factory setting is Disable.