Paradyne 3800 - Manual (Page 101)

COMSPHERE 3800 Series Modems – Model 3830
D-6 November 1996 3830-A2-GB91-20
Program Normal (PRN)
The Program Normal (PRN) command allows the DTE to enter and
store a telephone number to a specific directory location. PRN is
similar to the AT&Z command.
The PRN command format is:
PRNx;n
Where: x is the directory location 1–10;
n is the telephone number.
Request List of Stored Numbers (RLN)
The Request List of Stored Numbers (RLN) command displays
telephone numbers stored in the modem’s directory location. If the
RLN command is entered without specifying a directory location, then
all directory locations and telephone numbers are displayed. If a
directory location is entered, then only that telephone number is
displayed.
The RLN command format is:
RLN
which displays all directory locations, or:
RLNx
Where: x is a directory location.
List Stored Number Response (LSN)
LSN is a response to an RLN command issued by the DTE. If a
directory location is specified, then the telephone number for that
location is displayed. If no directory location is specified, then all
telephone numbers stored in memory are displayed.
The LSN response format is:
LSNx;n
Where: x is the directory location.
n is the telephone number.