Paradyne 3800 - Manual (Page 77)

COMSPHERE 3800 Series Modems – Model 3830
4-42 November 1996 3830-A2-GB91-20
Table 4-3
(14 of 15)
Model 3830 S-Registers
S85

Fast Disconnect
Allows the modem to disconnect immediately after receiving a disconnect
command from a local DTE or its own diagnostic control panel.
Register has the following values:
0 = Disable
1 = Enable
Factory setting is Disable.
S88

Straps When Disconnected
Determines if configuration options in the Active (Saved) configuration
area are loaded to Active (Operating) when the modem disconnects.
Register has the following values:
0 or 231 = No Change
1 or 232 = Reload
Factory setting is No Change.
S89

V.42 ARQ Window Size Increase
Register allows the V.42 Automatic Request for Transmission (ARQ)
window size to be set to a value from 6 to 15 frames to accommodate
satellite delays.
Register has the following values:
0 = 6 frames (default)
1 = 7 frames
2 = 8 frames
3 = 9 frames
D D
D D
9 =15 frames
This command applies only to connections made using V.42 bis data
compression or V.42 error control.
Factory setting is 6 frames.