Paradyne 3800 - Manual (Page 57)

COMSPHERE 3800 Series Modems – Model 3830
4-22 November 1996 3830-A2-GB91-20
Table 4-2
(16 of 22)
Model 3830 AT Commands
&V n

View Configuration Options
Displays each configuration group within the Active (Operating), Active
(Saved), Customer 1, and Customer 2 configuration areas as well as the
telephone numbers stores in directory locations 1–10.
&V0 Active (Operating) configuration options.
&V1 Active (Saved) configuration options.
&V2 Customer 1 configuration options.
&V3 Customer 2 configuration options.
&V4 Directory locations 1–10.
&W n

Write (Save to Memory)
Saves the current configuration options in Active (Operating) to one of
three configuration areas:
&W0 Saved to Active (Save).
&W1 Saved to Customer 1.
&W2 Saved to Customer 2.
&X n

Transmit Clock Source
Determines the source of timing for synchronous data transmitted from
the DTE.
&X0 Internal. Modem provides transmit clock source for synchronous
data (Pin 15).
&X1 External. Modem derives external transmit clock source provided on
Pin 24 for synchronous data.
&X2 Receive Clock Loop. Modem derives transmit clock source from
receive signal for synchronous data (Pin 17).