Paradyne 3800 - Manual (Page 72)

4. AT Command Set and S-Registers
4-37 3830-A2-GB91-20 November 1996
Table 4-3
(9 of 15)
Model 3830 S-Registers
S62

V.25 bis Coding
Identifies to the modem the type of coding used by the DTE while in V.25
bis mode.
Register has the following values:
0 = ASCII
1 = EBCDIC
Factory setting is ASCII.
S63

V.25 bis Idle Character
Identifies to the modem the type of idle fill used by the DTE while in V.25
bis mode.
Register has the following values:
0 = Mark
1 = Flag
Factory setting is Mark.
S64

V.25 bis New Line Character
Identifies to the modem the type of line terminator used by the DTE while
in V.25 bis mode.
Register has the following values:
0 = Carriage Return and Line Feed
1 = Carriage Return
2 = Line Feed
Factory setting is carriage return and line feed (CR + LF).