Paradyne 3800 - Manual (Page 60)

4. AT Command Set and S-Registers
4-25 3830-A2-GB91-20 November 1996
Table 4-2
(19 of 22)
Model 3830 AT Commands
\K n

Buffer Control, Send Break Control, Break Forces Escape
The \K n command sets three configuration options simultaneously:
Break Send Break
Buffer Break Forces
Control Control Escape
\K0 Discard Data Break First Enable
\K1 Discard Data Break First Disable
\K2 Keep Data Break First Enable
\K3 Keep Data Break First Disable
\K4 Keep Data Data First Enable
\K5 Keep Data Data First Disable
\K6 Discard Break Not Applic. Disable
BREAK BUFFER CONTROL
Determines if data stored in the modem’s buffer is saved or discarded
when the DTE issues a break sequence.
SEND BREAK CONTROL
Determines what is sent from the modem first, data or break if a break
sequence is sent from the DTE.
BREAK FORCES ESCAPE
Determines whether or not the modem should enter Command mode
when it receives a break character from the DTE.