Paradyne 3800 - Manual (Page 74)

4. AT Command Set and S-Registers
4-39 3830-A2-GB91-20 November 1996
Table 4-3
(11 of 15)
Model 3830 S-Registers
S76

V.32 bis Autorate (Dial Line)
Determines if the Autorate function is used on dial lines when connected
in V.32 bis mode. Autorate allows the modem to adjust line speed due to
noise.
Register has the following values:
0 = Enable
1 = Disable
2 = Start at 4800 bps
3 = Start at 9600 bps
Factory setting is Enable.
S77

DTR Alarm Reporting
Register determines whether an alarm is sent to the 6800 Series Network
Management System controller when the DTR signal has been Off for
more than 10 seconds.
Register has the following values:
0 = Disable
1 = Enable