Paradyne 3800 - Manual (Page 48)

4. AT Command Set and S-Registers
4-13 3830-A2-GB91-20 November 1996
Table 4-2
(7 of 22)
Model 3830 AT Commands
X n, continued
BUSY TONE DETECT
Sets the modem to monitor for Busy Tone (Enable) or ignore Busy Tone
(Disable).
Disable. Modem ignores busy tone.
Enable. Modem monitors for busy tone.
Y n

Long Space Disconnect
Determines the modem’s response to a continuous spacing condition
sent from the remote modem when it goes on-hook. Issuing a long space
is one method of disconnecting a call.
Y0 Disable. Ignores long space.
Y1 Enable. Disconnects if long space is detected. Enables transmission
of a long space.
Z n

Reset and Load Active
Z0 Loads configuration options from Active (Saved) to Active (Operating).
Z1 Loads configuration options from Customer 1 to Active (Operating). Z2
Loads configuration from Customer 2 to Active (Operating).
Z3 Loads configuration options from Active (Saved) to Active (Operating)
and performs a reset.
Z9 Performs a full modem reset as if the modem were powered off and
on.