Paradyne Hotwire Routers - Manual (Page 93)

D-1 6371-A2-GB20-10 August 2000
DSL Router Terminal Emulation
D
DSL Router Terminal Emulation
The Command Line Interface is available at the DSL router when the Console
cable is connected to a VT100-compatible terminal or a PC running a terminal
emulation program. Verify the terminal settings:
H
Data rate set to 19.2 kbps (19200 bps)
H Character length set to 8
H
Parity set to None
H Stop bits set to 1
H
Flow control set to Off or None
Accessing the List Command Output
Use the list confg command to output command strings needed to restore
the current running configuration. Output from the List Confg command can be
captured to a text file using most terminal emulation programs. Examples of two
VT100-compatible programs are provided.
Once the text file is captured, the DSL router can be placed in configuration
mode. The text file can be fed back to configure the DSL router.