Paradyne Hotwire Routers - Manual (Page 61)

Command Line Interface
A-11 6371-A2-GB20-10 August 2000
dhcp server leasetime min-lease-time max-lease-time
Specifies the lease-time settings used by the DHCP server.
Minimum access level: Administrator/Config
min-lease-time – Default = 120 minutes (2 hours)
max-lease-time – Default = 4320 minutes (72 hours)
Example: dhcp server leasetime 120 320
dhcp server router ip-address
Specifies the router IP address used by the DHCP server.
Minimum access level: Administrator/Config
Example: dhcp server router 132.53.4.2
dhcp server name domain name
Specifies the domain name used by the DHCP server.
Minimum access level: Administrator/Config
Example: dhcp server name Clearwater7
dhcp server nameserver ip-address
Specifies the DNS IP address used by the DHCP server.
Minimum access level: Administrator/Config
Example: dhcp server nameserver 132.53.4.2
DHCP Relay Agent
dhcp relay { enable | disable }
Enables or disables the DHCP relay agent. The DHCP relay agent will maintain up to
256 DHCP clients.
Minimum level access: Administrator/Config
enable – Enable the DHCP relay.
disable – Disable the DHCP relay. Default = disable.
Example: dhcp relay enable
dhcp relay address ip-address
Use this command to specify the DHCP server to forward DHCP requests to.
Minimum level access: Administrator/Config
Example: dhcp relay address 132.23.4.2
dhcp relay max number
Use this command to specify the maximum number of DHCP clients.
Minimum level access: Administrator/Config
number – 1 — 256
Example: dhcp relay max 133