Paradyne Hotwire Routers User Manual
Page 65
Command Line Interface
A-15
6371-A2-GB20-10
August 2000
show NAT napt
Sample show NAT napt display:
NAT NAPT – { disabled | enabled }
NAT NAPT – public IP-address:
x.x.x.x
NAT timeout:
xx minutes
NAT NAPT mappings:
private-ip
private-port mapped-port
protocol
x.x.x.x
xxxx
xxxx
{ udp | tcp }
show traps
Sample show traps display:
warmstart { disabled | enabled }
authen fail { disabled | enabled }
selftest { disabled | enabled }
devfail { disabled | enabled }
test start { disabled | enabled }
test stop { disabled | enabled }
ccn { disabled | enabled }
link up { disabled | enabled }
link down { disabled | enabled }
For additional information, refer to Appendix C,
show dhcp server
Displays the DHCP relay’s current status and configuration.
Minimum access level: Administrator
Sample show dhcp server display:
DHCP server { disabled | enabled }
DHCP server – router ip-addr:
x.x.x.x
DHCP server – name: domain name.com
DHCP server – nameserver ip-addr:
x.x.x.x
DHCP server – address range:
lower ip-addr
x.x.x.x
upper ip-addr
x.x.x.x
DHCP server – subnet mask:
x.x.x.x
DHCP server – leasetime:
minimum
xxxx minutes
maximum
xxxx minutes
DHCP server bindings:
ip-addr
MAC addr
Leasetime (min.)
x.x.x.x
xx:xx:xx:xx:xx:xx
nnnn