For each specific discard reason, Refer to table 5-2, Discard reasons for the dsl interface – Paradyne Hotwire Routers User Manual
Page 43: Dsl1, Dsl interface, Table 5-2)
Monitoring the DSL Router
5-5
6371-A2-GB20-10
August 2000
Table 5-1.
Discard Reasons for the Ethernet Interface (eth1) (2 of 2)
Discard Reasons for the Ethernet Interface (eth1)
Receiver Missed Frame
Signal Quality Error on TX
Srv Domain Phy TX Queue Overflows
Srv Domain Receive Queue Overflows
Srv Domain Wrpr TX Queue Overflows
TX Halted
TX Parity Error
TX Underflow
Unsupported Encapsulation Protocol
Unsupported SNAP Network Protocol
Unsupported Type
II
Network Protocol
Table 5-2.
Discard Reasons for the DSL Interface (dsl1) (1 of 2)
Discard Reasons for the DSL Interface (dsl1)
Alignment Error
Mgmt Domain Phy TX Queue Overflows
Mgmt Domain Rcv Queue Overflows
Mgmt Domain TX Link Queue Overflows
Mgmt Domain Wrpr TX Queue Overflows
Receive Aborts
Receive Buffer Pool Depletion
Receive CRC Errors
Receive Frame Too Short or Too Long
Receive Interrupt Errors
Receive Overruns
Receive Unknown Errors
Service Domain Rcv Queue Overflows
Srv Domain Phy TX Queue Overflows
Srv Domain TX Link Down Discards