Paradyne Hotwire Routers - Manual (Page 42)

Monitoring the DSL Router
5-4 6371-A2-GB20-10 August 2000
Clearing Statistics
From the Command Line Interface, the statistics can be cleared.
clear statistics [ eth1 | dsl1 | ip ]
Clears the statistics for the named interface. If no interface is entered, ALL statistics for
all interfaces are cleared.
Minimum access level: Administrator
eth1 – Ethernet interface statistics
dsl1 – DSL interface statistics
ip – IP processing statistics
Example: clear statistics eth1
List of Discard Reasons
The Discard Statistics represents the number of frames or packets discarded.
The display includes the reason for the discard. The following tables list discard
reasons for:
H Ethernet Interface (Table 5-1)
H
DSL Interface (Table 5-2)
H IP (Table 5-3)
Table 5-1. Discard Reasons for the Ethernet Interface (eth1) (1 of 2)
Discard Reasons for the Ethernet Interface (eth1)
Alignment Error
CRC Error
Excessive Collisions
Excessive Defers on TX
FIFO Overflow Error
Frame Length Greater than Max
Late Collision on TX
No Carrier Detect on TX
Parity Error
Receive Buffer Pool Depletion
Receiver Halted