Command line interface, Command line interface feature, Syslog information – Paradyne Hotwire Routers User Manual
Page 51: Appendix a, Refer to appendix a, For access level details for each, Command line entry, For specific commands and
A-1
6371-A2-GB20-10
August 2000
Command Line Interface
A
Command Line Interface Feature
The Hotwire DSL router is managed with text commands from the Command Line
Interface. The Command Line Interface can be accessed:
H
Locally with an ASCII terminal connected to the Console port, or
H
Remotely via a Telnet session.
The Command Line Interface is ASCII character-based and provides the
capability to:
H
Display the syntax of commands.
H
Change the operational characteristics of the DSL router by setting
configuration values.
H
Restore all configuration values to the initial factory defaults.
H
Display DSL router hardware and identification information.
H
Display system status, including DSL link status and Ethernet status.
H
Display a sequence of commands that would have the effect of setting all
configurable parameters to their current value.