Paradyne Hotwire Routers - Manual (Page 83)

Traps & MIBs
C-11 6371-A2-GB20-10 August 2000
Paradyne Enterprise MIBs
The following Paradyne Enterprise MIB Objects are supported by the unit:
H Device Control MIB (pdn_Control.mib)
H
Device Diagnostics MIB (pdn_diag.mib)
H Health and Status MIB (pdn_HealthAndStatus.mib)
H
Configuration MIB (pdn_Config.mib)
H Interface Configuration MIB (pdn_inet.mib)
H ARP MIB (pdn_Arp.mib)
H NAT MIB (pdn_NAT.mib)
H DHCP MIB (pdn_dhcp.mib)
H
DSL Endpoint MIB (DslEndpoint.mib )
H SYSLOG MIB (pdn_syslog.mib)
H
Interface Configuration MIB (pdn_IfExtConfig.mib)
Device Control MIB
Objects supported by the Device Control MIB, pdn-Control.mib, include the
Device Control Group (fully supported) and the Device Control Download group.
Table C-7. Device Control Table Objects
Object Description Setting/Contents
devHWControl Reset
(
control 1)
Initiates a hardware
power-on reset. Value from this object:
H noOp(1)
H Reset(2) – Resets the DSL router with no
warning.
devControlDownLoadIndex
(devControlDownloadEntry 1) Represents the firmware
bank. H bank (1)
H bank (2)
devControlDownLoadRelease
(devControlDownLoadEntry 2) Indicates the software
release for the bank. Numeric.
devControlDownLoadOperStatus
(devControlDownLoadEntry 3) Indicates whether the
downloaded entry contains
a valid or invalid software
release. H (1) – Valid software release.
H (2) – Invalid software release. Displays if
devControlDownLoadRelease is blank.
devControlDownLoadAdminStatus
(devControlDownLoadEntry 4) Indicates whether the
downloaded entry is active
or inactive. H Active(1)
H Inactive(2)
Supported as read-only.